Description
Products Description:
Townlite UV Room sterilizer FY-30FCI, has 4 pieces of 30 watts UV lamps that emit a high intensity ultraviolet light that hits every surface in the room and kills any micro
organisms or pathogen including MRSA, hand foot mouth disease,colds and flu,pneumonia,molds,e.coli,salmonella and similar type bacteria.The light penetrates and destroys the actual DNA of micro organisms.
There is no known micro organism that is immune to UV-C energy. UV Room Sterilizer disinfects approximately up to 60 square meters room area. There are numerous safety features bulit with a 0-1440 mins timer and motion sensor.
UV Room Sterilizer has numerous applications not just for hospitals but can be used in schools,play areas,hotels,clinics,homes,cinemas,buildings,food manufacturing companies and offices. it quickly and effectively provide disinfection of all surfaces and air within minutes.UV Room Sterilizer is laboratory tested ,used by hospitals and recommended by doctors.
This product is made of carbon steel,with its four-tube structures, but also can be used independently ,the technical parameters are:
1.Tube Power:≥30W×4
2.Number of tubes:4
3.Applicable static area:≥60m2
4.Voltage:220V±10%,Frequency:50Hz±10%
5.Input power:180VA
6.UV wavelength:253.7nm
7.Irradiance:≥428uw/cm2
8.It is movable and foldable, the tube could be concealed inside, and adjusted to various angles:30°,60°,90°,135°,180°.
9.It is equipped with a timer equipment with the time limitation of 0-1440 min.
10.During the sterilization, if a person or an animal breaks into the room, the lamp will be alarmed and off, automatically open left.
KNOW YOUR STERILIZER:
1.30W Ultraviolet germicidal lamp
2.Adjustable arms from 30-180 degree angle
3.Carbon steel body
4.Lamp box
5.Infrared sensor
6.Control Panel-Light 1/2
7.Control Panel-Timer 0-1440mins
8.Handle
Method of usage:
1.Clean the room before using uv room sterilizer.
2.Carefully place the UV Room Sterilizer in the center of the room or on a spot where UV light can beam more things in the room.
3.Arrange everything found in the room to ensure they will be exposed to UV light. Place things that are touched more often closer to the system to maximize sterilization.
4.Plug in and set the timer to the desired duration.The system has a time delay of 15 seconds upon timer setting, this allows the system operator to vacate the room.The UV light will be on after 15 seconds.Sterilization start. (We suggest a minimum of 30 minutes to a 30 sq.m.areas.)
5.UV Room Sterilizer will suspend and uv light will shut off if someone is around the machine.Then resume when people left.
6."Lamp 1 "control 2 lamps,'lamp 2"control another 2 lamps.
7.It will generate smell after sterilization.It's perfectly natural.Pls open the window to let the smell out after sterilization.
8.Wipe the lamps with dry cloth after sterilization.Carefully stow the arms in the arms door.
SAFETY CONSIDERATIONS:
Don’t look directly at the ultraviolet light source,should be used in unmanned circumstances.
Ensure the surface clean of UV lamp,or will affect the performance.
Keep in the dry and clean room.Should Extend the exposure time if the room temperature is below 20 degrees Celsius or above 40 degrees Celsius.
When sterilizing the surface of object,should illuminate directly within 1m between the ultraviolet light and surface.
When sterilizing pet or animal room,please make sure pets don’t touch the ultraviolet sterilizer.Please protect the eyes and skins of pets with shading cloth.
Open the window and ventilation for 10 minutes after sterilization.
UV illumination less than 70% or more than 2000 hours working should change the lamp.
